Decorate your world with moon light - cast a gentle glow over your desk or bedside table.
Features:
- 3D printing technology: printed layer by layer, creating the real appearance of the moon
- Charging port and switch integration: easy to operate
- Warm and gentle LED lights: touch the metal ring to switch the color and turn off the light
- Safe and environmentally friendly: PLA material extracted from corn stalks, non-toxic & environmentally friendly
- Long using time: 240mAh built-in battery, after the full charge, the lamp can be used 8-25 hours / a full charge takes about 6-8 hours
- 6 diameters of the moon light to choose: 7.8cm, 9cm, 10cm, 12cm, 15cm, 18cm
Specifications:
- Material: PLA
- Wattage: 0.5W
- Brightness: stepless adjustment, long press the switch to change the brightness
- Color temperature: 3000K / 6000K
- Bulb: 1pcs white LED light and 1pcs yellow LED light
- Battery capacity: 1 x 240mAh li-po battery (built-in)
- Charging time: 6-8 hours
- Working time: 8-30 hours (depends on brightness)
- Power supply: USB DC 5V
How to Use:
1. Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow.
2. Long press the metal ring to adjust the brightness / in-built brightness memory function.
3. Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during charging.
4. The red light will automatically turn off when fully charged.
Features:
- 3D printing technology: printed layer by layer, creating the real appearance of the moon
- Charging port and switch integration: easy to operate
- Warm and gentle LED lights: touch the metal ring to switch the color and turn off the light
- Safe and environmentally friendly: PLA material extracted from corn stalks, non-toxic & environmentally friendly
- Long using time: 240mAh built-in battery, after the full charge, the lamp can be used 8-25 hours / a full charge takes about 6-8 hours
- 6 diameters of the moon light to choose: 7.8cm, 9cm, 10cm, 12cm, 15cm, 18cm
Specifications:
- Material: PLA
- Wattage: 0.5W
- Brightness: stepless adjustment, long press the switch to change the brightness
- Color temperature: 3000K / 6000K
- Bulb: 1pcs white LED light and 1pcs yellow LED light
- Battery capacity: 1 x 240mAh li-po battery (built-in)
- Charging time: 6-8 hours
- Working time: 8-30 hours (depends on brightness)
- Power supply: USB DC 5V
How to Use:
1. Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow.
2. Long press the metal ring to adjust the brightness / in-built brightness memory function.
3. Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during charging.
4. The red light will automatically turn off when fully charged.